CATEGORII
Phono Pre-Amplifier MM/MC Ultra High-End (Class A)

NAT AUDIO

SIGNATURE PHONO

Phono Pre-Amplifier MM/MC Ultra High-End (Class A)

Made in Serbia BEST BUY
44,999.00 RON (TVA inclus) Compara
Cantitate:
Stoc:DISPONIBIL
NAT AUDIO - SPECTACULOS

Un singur cuvant defineste totul: SPECTACULOS.

O liga aparte, un Ultra High-End pur, NAT AUDIO seteaza propriile standarde.
Si efectele sunt imediate.
Impactul vizual este imediat completat de cel sonic, emotional.

Reprezentatia este live, in fata ta, in casa ta.

Totul pana la cele mai mici detalii, pana la cele mai profunde trairi pe care ti le poate
crea un concert live, in confortul casei tale.

Smoothness, life like, deeply musical sound.

SPECTACULOS.

Din 1 Ianuarie 2022 la Stereo Planet in Romania.

SIGNATURE PHONO
Vacuum based inverse network (Vacuum RIAA by NAT) Tube Phono Stage

NAT set a new standard in Phono state-of-the art product by new approach - Vacuum based
Inverse RIAA network in model Signature Phono New - Vacuum RIAA.
Standard inverse RIAA network is based on resitor or even better inductor as main part in the
signal path! NAT use vacuum field medium instead.
Signature Phono stage contains 10 vacuum triode tubes in full zero feedback configuration.

Signature Phono is entirely fully balanced phono stage from input (for MC mode) to output!
There is possibility to change from balanced to unbalanced type of operation (on rear panel).

Input AC power is filtered and fully regulated by cord-conditioner separate unit of Signature Phono.
Power supply of extremely high energy (over 320J) is used to supply low noise high gain 6HM5
triode tubes!
It is tubes of N.O.S. (New Old Stock) grade.
Premium genuine Oyaide input power connector is used as well!
There is no need to use any additional power cord!
Separate cord-conditioner replace power cord in best possible manner! T
here is internal input main phase detector (dectetion of L) as well.
It is in form of led indicator positioned on separate cord - conditioner chassis!

Hand coiled both output transformers as well as inter-stage chokes (4 separated magnetic unit)
form in Signature Phono simple as possible signal path!
Magnetic material that is used inside unit is the best possible by today audiophile standard -nano - crystalline!

Special constructed output transformer is reconfigurable from pure single-ended (RCA) to pure balanced
(XLR) operation in Signature Phono!

Low output types of MC cartridges are boosted by NAT premium fully balanced hand coiled
nano-crystalline set-up transformers.

Selectable load resistance (in six step - 50,100,200,500,1k,2k) for the different cartridge is available!

Signal-to-noise ratio is excellent due to fact that input MC transformers are almost noiseless!

With output impedance of 300 ohms Signature Phono may easy drive any long length interconnect cable.

High quality gold plated teflon (PTFE) isolated connectors, both input and output are used.

Each Signature Phono is hand crafted and fine adjusted device with burn in test period of min. 100 hours.
Quality of electronic components that is used inside Signature Phono are at high level - military grade
0.1% tolerance capacitors, high grade with over of 320J energy from main capacitor, Vishay 0.1% resistors,
electrolytic capacitors for 105C of operating temperature, silver-OFC wired input for MC stage.
Signature Phono device works properly at world wide AC line voltage from 100 - 250 VAC, 50-60 Hz
(different voltages set in factory only).

To repeat, Signature Phono confirm original innovative approachof NAT globally.

Specifications
Frequency Response: 10 Hz to 100 kHz
Noise: < -84 dB "A" weighted

Gain: 42 dB MM standard + 6 dB MM HIGH + 14db MC ( in TOTAL 62 dB or 56 dB as option)


RIAA Accuracy: ± 0.4 dB
Channel Unbalance: < 0.1 dB
THD & N: < 0.1 %

Input Impedance: Selectable (50,100,200,500,1k,2k) for MC, 47k as standard for MM

Stereo Separation: > 96 dB
Tube Complement: 6HM5 low noise triode
Phase Status (non inverted): 0 degree
Output Impedance: < 300 ohms @ 1kHz

Power Requirements: 100 VAC to 240 VAC @ 50 to 60 Hz, max. 60 VA

Dimensions (W x D x H): 48 x 42 x 17 cm / 28 x 18 x 7 cm (Power Supply)
Weight: 24 kg unpacked
Weight: 34 kg packed

Color: black
Producator: Produs:
Imagine
Phono Pre-Amplifier MM/MC Ultra High-End (Class A)
Produs NAT AUDIO
Phono Pre-Amplifier MM/MC Ultra High-End (Class A)
SIGNATURE PHONO
Descriere NAT AUDIO - SPECTACULOS

Un singur cuvant defineste totul: SPECTACULOS.

O liga aparte, un Ultra High-End pur, NAT AUDIO seteaza propriile standarde.
Specificatii Specifications
Frequency Response: 10 Hz to 100 kHz Noise: < -84 dB "A" weighted

Gain: 42 dB MM standard + 6 dB MM HIGH + 14db MC ( in TOTAL 62 dB or 56 dB as option)


RIAA Accuracy: ± 0.4 dB Channel Unbalance: < 0.1 dB THD & N: < 0.1 %

Input Impedance: Selectable (50,100,200,500,1k,2k) for MC, 47k as standard for MM

Stereo Separation: > 96 dB Tube Complement: 6HM5 low noise triode Phase Status (non inverted): 0 degree Output Impedance: < 300 ohms @ 1kHz

Power Requirements: 100 VAC to 240 VAC @ 50 to 60 Hz, max. 60 VA
Dimensions (W x D x H): 48 x 42 x 17 cm / 28 x 18 x 7 cm (Power Supply) Weight: 24 kg unpacked Weight: 34 kg packed

Color: black
Premii
Preţ: 44,999.00 RON (TVA inclus)
Disponibilitate Disponibil
REVIEWS CLIENTI
Adauga review
Ascunde review

Spune-ţi opinia

Numele tău:


Numarul de telefon:


Email-ul:


Opinia ta: Notă: Codul HTML este citit ca şi text!

Nota: Rău           Bun

Introduceţi codul din imagine: