Brand din Top 5 mondial High-End - in opinia specialistilor - PLINIUS AUDIO seduce, in egala masura, atat
autorii review-urilor produselor sale cat si posesorii sai, indiferent de continentul pe care s-ar afla acestia.
Fabricate in totalitate numai in Noua Zeelanda, manual, PLINIUS AUDIO foloseste numai componente
high-end in toate produsele sale, implicit carcasele acestora fiind fabricate din acelasi material din care
sunt construite avioanele.
Renumite pentru calitatea exceptionala a sunetului lor, produsele PLINIUS AUDIO va vor asigura o
transparenta si o naturalete a sunetului, fara a produce o "coloratie" a acestuia.
Veti avea placuta surpriza sa observati o neasteptata versatilitate in raport cu diferite tipuri si brand-uri
de boxe si de cabluri, nefiind constransi in niciun fel in acest sens, fiind produse pe care le veti cumpara
si folosi atat pentru prezent cat si pentru viitorul indepartat, in sistemul de acasa.
1989 saw the introduction of the PLINIUS SA-100, developed as a stereo amplifier from early work done by
the PLINIUS design team.
The SA-100 broke new ground in that a powerful Pure Class A amplifier was available within an economic package.
Many hundreds were sold under different guises, culminating in the SA-102 in 2003.
Time passes, development continues and with the introduction of the SA-Reference amplifier a new standard
has been achieved for PLINIUS.
The PLINIUS SA-103 has been developed on the heels of the newer PLINIUS amplifiers and it shares the sonic
and aesthetic gains that have elevated these designs to new levels.
The classic PLINIUS look has been maintained with the use of the distinctive heatsink profile that has allowed
PLINIUS to produce an amplifier capable of operating in Pure Class A up to 125 watts per channel without the
use of troublesome fans or other methods used for cooling.
Balanced circuits used in the SA-103 allow full Balanced Mono operation in excess of 400 watts.
The addition of another SA-103 will provide an amplification system capable of the highest level of excellence
without totally breaking the bank.
As with all PLINIUS amplifiers,premium components have been used throughout.
There is the addition of a 12 Volt trigger which will allow integration into a semi automated system.
Sonically the SA-103 embodies all that we have learned and will paint a very believable and transparent facsimile
of a live musical event.
A small group of dedicated technicians build each SA-103 by hand in our New Zealand factory ensuring
that our stringent standards are maintained.
Technical Specifications
Power:
125 watts continuous per channel into 8 Ohms 2 channel stereo mode
400 watts continuous into 8 Ohms Balanced Mono mode
From 20Hz to 20kHz
Frequency Response: 20Hz to 20kHz ± 0.2dB. 0dB at 1Hz and -3dB at 70kHz
Distortion: Typically <0.05% THD at rated power, 0.1% THD and IMD worst case prior to clipping
Current Output:
50A short duration peak per channel
Fuse protected
Rise Time: Typically 5µS
Hum & Noise: 100dB below rated output 20Hz to 20KHz A-weighted
Input Impedance: 47,000 ohms
Gain on RCA Inputs: 32dB
Gain on balanced Inputs: 38dB
Dimensions: (H x W x D): 220 x 500 x 455 mm
Weight: 38 kg
Colors: black, silver