SOUL NOTE - Placere pura, naturalete, autenticitate = sunetul oricarui produs SOUL NOTE.
Scopul unic este de a reda exact imprimarea in toata splendoarea autenticitatii sale si a nu
interveni in niciun sens in modificarea sunetului.
Ce iti poti dori mai mult?
Design unic, spectaculos, completat de o fiabilitate de exceptie.
Made in Japan.
Unul dintre cele mai faimoase Brand-uri High-End ale momentului la nivel mondial,
prezent in Romania din 1 Iulie 2023.
A-0 v2
INTEGRATED AMPLIFIER
Full discrete non-NFB circuit
An extremely simple configuration, consisting merely of a power amplifier with a selector
and volume control, is identical to that of SOULNOTE‘s flagship integrated amplifier A-3.
Single push-pull output stage using TO-220 transistors
The final output stage employs TO-220 transistors with low Cob and high-frequency
characteristics in a single push-pull configuration.
This is a high-end amplifier prioritizing quality, achievable only by limiting maximum output to 10W.
Four-stage Darlington circuit
Delivering a maximum output of 10W while employing the same four-stage Darlington configuration
as A-1 ver.2 and A-2 ver.2.
Even at low volumes, it demonstrates drive capability, producing air pressure changes.
Newly developed bias circuit
A newly developed bias circuit is adopted. S/N has been dramatically improved.
Enhanced pre-out function
For the pre-out output, a powerful High mode is selectable, which outputs the loudspeaker
output signal directly.
A Low mode is also selectable, where the output is attenuated for easier handling.
When selecting the pre-amplifier, a mode has been applied that outputs the loudspeaker
output signal.
A mode that cuts off the loudspeaker output is also selectable.
The pre-out terminals feature both RCA and XLR connectors.
The XLR terminals are configured as:
[1] GND [2] HotA [3] Floating GND, enabling the noise-cancelling benefits inherent to
balanced connections.
Using SOULNOTE non-shielded balanced cables such as RBC-1 allows the pre-amplifier
to deliver its maximum potential.
Non-fixed top cover
The top cover is not fixed.
This achieves a natural sound field and a sense of openness.
Direct mechanical grounding construction
By positioning a foot directly beneath the transformer, its vibration is released directly outside
the chassis.
Furthermore, employing a three-point support system via spike feet eliminates sound muddiness
caused by chassis damping, achieving a vibrant and soulful sound.
Specifications
Rated output:
10W x 2 (8ohm)
Headphones: 3.0W x 2 (32 Ω)
Pre-Out: 2.0 V
Total Harmonic Distortion:
Loudspeakers: 0.2 % (10 Hz to 100 kHz, 3,3 W / 8 Ω)
Headphones: 0.03 % (10 Hz to 100 kHz, 200 mW / 32 Ω)
Pre-Out: 0.01 % (10 Hz to 100 kHz, 2 V / 10 kΩ)
Frequency characteristic:
Loudspeakers (8 Ω / 1 W): 5 Hz to 350 kHz (+0/–1 dB)
Headphones (32 Ω / 200 mW): 5 Hz to 400 kHz (+0/–1 dB)
Pre-Out (10 kΩ / 2 V): 5 Hz to 400 kHz (+0/–1 dB)
Input sensitivity/impedance:
LINE 1, 2: 0.66 V / 10 kΩ (H), 4.0 V / 50 kΩ (L)
LINE 3, 4: 0.66 V / 5 kΩ (H), 4.2 V / 25 kΩ (L)
Total Gain:
H: 22 dB
L: 8 dB
S/N ratio: 115dB (IHF A network)
Power voltage: 230V AC 50Hz
Power consumption: 31 W, 20 W (during idling)
Dimensions (W x H x D) 430 x 109 x 418 mm
Weight: 8 kg
Colors: Premium Silver, Premium Black
Included accessories: Spikes, Power cord