CATEGORII
> Amplificator Stereo > SYNTHESIS - A100 Titan
Amplificator Stereo Integrat High-End (+ DAC Integrat), 2x100W

SYNTHESIS

A100 Titan

Amplificator Stereo Integrat High-End (+ DAC Integrat), 2x100W

Made in Italy BEST BUY HIFI NEWS OUTSTANDING PRODUCT
54,999.00 RON
39,999.00 RON (TVA inclus) Compara
Cantitate:
Stoc:DISPONIBIL
SYNTHESIS - Italienii de langa Ancona stiu cum se creeaza bijuteriile.
Bijuterii pentru fiecare buzunar, executate cu stil, rafinament si sex appeal.
Nu este nicio exagerare in compararea amplificatoarelor SYNTHESIS cu bijuteriile
de lux, purtate de persoane cu gust si standarde pe masura.

Este suficient sa vedeti si sa ascultati primul produs din gama SYNTHESIS, un entry-level,
si sansele de a va indragosti de sunetul produs de Soprano este garantat.

Vine intrebarea imediata.
Daca un produs de 8.499 lei (Soprano) suna asa, oare cum vor suna celelalte, superioare lui?

Intrebarea isi va gasi singura raspuns, imediat ce veti avea ocazia sa achizitionati oricare din
produsele SYNTHESIS.

Three models of stereo tube amplifiers with DAC's on board, guaranteeing exceptional sonic performance
from any digital source.
Made with the finest materials & advanced technology, this series is a sophisticated blend of research & experience.
Designed without compromise for a rich sound & faithful music reproduction.
The A100 Titan provides a minimum of 200 watts (100W per channel), power output from 8, KT66's in Ultra-Linear (UL) - push/pull operation.
The A100 Titan like it's bigger brother also features a newly designed custom output transformer resulting
in a rich sound stage but with an authority that belies its 100W.
Features
USB & S/PDIF input
For the first time we include an onboard 24Bit 192KHz Wolfson DAC for an extraordinary listening experience.
DC Powered tube heater
All tubes, except KT66 have DC stabilised heater circuits to reduce hum noise to a near in-audible minimum.
Output transformer
The Output transformer uses a Hi-Grade Iron-Silicon for superb frequency reproduction & width.
With this newly designed custom output transformer unique to the A100 Titan we are able to achieving a highly
delicate & precise sound reproduction faithful to the original recording.
Mechanical chassis construction
The power supply & output transformers are held by an extremely rigid "H" structure that keeps the unit free
from unwanted vibrations which further helps reduce unwanted noise to the tubes.
Remote control
Featuring a superb CNC machined case it has a soft button design, perfectly matching the aesthetics for the "ACTION" series.
Feet
Four CNC machined aluminium feet with an insert of natural rubber.
The depth & form of these rubber feet has been calculated to minimise vibrations of the amplifier in isolation from its surroundings.
Binding posts
Gold plated professional binding posts for a continued oxidisation free connection further improve sound refinement.
Sockets
Gold plated ceramic sockets for a continued oxidisation free connection further improve sound refinement.
Components
Components for the A100 Titan have been selected with great care throughout.
Only the best available components are considered & all must undergo an exhaustive analysis of their sonic influence prior to final selection.
Selected tubes
All tubes used are selected after 2 stage warm up.
A fully computer monitored machine controls the process & at the end of this, selects the perfect tubes which are then matched for a perfect balance.

Specifications
Power stage (1 ch.): 4 x KT66
Input stage/driver (1 ch.): 1 x ECC83/12AX7
Driver (1 ch.): 1 x 12BH7
Frequency response: 20Hz to 20KHz +- 0.5dB
Input impedance: 50Kohm
Input sensitivity: 200mV / 100W
Output impedance: 4-8 ohm
Power stage config.: Parallel Push-Pull
Ultralinear 43% tap
Power output: 100W RMS into 6 ohm
Each channel AB1 Class
Signal/Noise ratio: >90dB, A weighted
Inputs:
4 x RCA
1 x USB
Outputs:
Pre Output (Volume controlled)
Digital Stage
Compatible format: PCM Stereo 32-192KHz
Input: USB (PC-Mac) S/PDIF
Up sampling: 192KHz / 24Bit
D/A converter: Dual Mono 2xWolfson WM8740
Output Stage: NJM2114L Op-Amp
Analogue output: 1V RMS
Signal/Noise ratio: >90dB, A weighted

Power consumption: 450 W
Dimensions: (W x D x H): 420 x 450 x 260 mm
Weight: 40 kg


Colors: Anodized Aluminium Black, Silver
Producator: Produs:
Imagine
Amplificator Stereo Integrat High-End (+ DAC Integrat), 2x100W
Produs SYNTHESIS
Amplificator Stereo Integrat High-End (+ DAC Integrat), 2x100W
A100 Titan
Descriere SYNTHESIS - Italienii de langa Ancona stiu cum se creeaza bijuteriile.
Bijuterii pentru fiecare buzunar, executate cu stil, rafinament si sex appeal.
Specificatii Specifications
Power stage (1 ch.): 4 x KT66 Input stage/driver (1 ch.): 1 x ECC83/12AX7 Driver (1 ch.): 1 x 12BH7 Frequency response: 20Hz to 20KHz +- 0.5dB Input impedance: 50Kohm Input sensitivity: 200mV / 100W Output impedance: 4-8 ohm Power stage config.: Parallel Push-Pull Ultralinear 43% tap Power output: 100W RMS into 6 ohm Each channel AB1 Class Signal/Noise ratio: >90dB, A weighted Inputs:
4 x RCA
1 x USB Outputs:
Pre Output (Volume controlled) Digital Stage Compatible format: PCM Stereo 32-192KHz Input: USB (PC-Mac) S/PDIF Up sampling: 192KHz / 24Bit D/A converter: Dual Mono 2xWolfson WM8740 Output Stage: NJM2114L Op-Amp Analogue output: 1V RMS Signal/Noise ratio: >90dB, A weighted
Power consumption: 450 W Dimensions: (W x D x H): 420 x 450 x 260 mm Weight: 40 kg

Colors: Anodized Aluminium Black, Silver
Premii
DVDPLANET
Preţ: 54,999.00 RON
39,999.00 RON (TVA inclus)
Disponibilitate Disponibil
REVIEWS CLIENTI
Adauga review
Ascunde review

Spune-ţi opinia

Numele tău:


Numarul de telefon:


Email-ul:


Opinia ta: Notă: Codul HTML este citit ca şi text!

Nota: Rău           Bun

Introduceţi codul din imagine:



Continuare