Unico 90 is a class AB hybrid integrated amplifier with zero feedback, as the most precious valve amplifiers uses only two stages. The heart of the Unico 90 circuit is found in its hybrid structure. All of the gain, and subsequently the "character" of the amp, is determined by the only tube stage made with ECC83 and ECC 81in particular multiple-parallel-totem-pole.
Specifications Output power: 100 +100 W RMS at 8Ω / 160 + 1600 W RMS at 4Ω Frequency response: -1dB @ 12Hz & 45kHz, -3 dB Input impedance: 21kΩ // 300pF Input sensitivity: 860mV RMS
Input stage: Pure A class, double triode totem pole ECC83 and parallel totem pole ECC81 This single stage due to the particular circuitry is able to amplify the input signal and drive directly the power stage Output stage: Class AB thermostable, complementary Hexfet (3 pairs for channel) Number of stage: 2, This amplifier due to the particular circuitry is realized by only two stages: input stage and output stage, and use only local feedback
Global Feedback factor: 0 dB Local Feedback factor: 16 dB THD: < 0.15% @ 1kHz, 1 W < 0.5% @ 1kHz, 10 W Output resistance: <0.4 ohm, resistive on all audio frequencies
Input: 6 line (3 unbalanced, 2 balanced, 1 “bypass” unbalanced) Line Outputs: 1 tape, 1 sub (volume controlled) Output connectors: 4 + 4 bi-wiring
Power Consumption: 550 W (at max power on 8 ohm)
Dimensions (H x W x D): 18 x 43.5 x 44 cm Weight: 20 kg
Colors: black, silver
Producator:Produs:
Imagine
Produs
UNISON RESEARCH
Amplificator Stereo Integrat High-End, 2x100W (8 Ohms) - BEST BUY
Unico 90
Descriere
Unico 90 is a class AB hybrid integrated amplifier with zero feedback, as the most precious valve amplifiers uses only two stages. The heart of the Unico 90 circuit is found in its hybrid structure.
Specificatii
Specifications Output power: 100 +100 W RMS at 8Ω / 160 + 1600 W RMS at 4Ω Frequency response: -1dB @ 12Hz & 45kHz, -3 dB Input impedance: 21kΩ // 300pF Input sensitivity: 860mV RMS
Input stage: Pure A class, double triode totem pole ECC83 and parallel totem pole ECC81 This single stage due to the particular circuitry is able to amplify the input signal and drive directly the power stage Output stage: Class AB thermostable, complementary Hexfet (3 pairs for channel) Number of stage: 2, This amplifier due to the particular circuitry is realized by only two stages: input stage and output stage, and use only local feedback
Global Feedback factor: 0 dB Local Feedback factor: 16 dB THD: < 0.15% @ 1kHz, 1 W < 0.5% @ 1kHz, 10 W Output resistance: