CATEGORII
Phono Stage MM/MC High-End

AURORASOUND

VIDA-MKII

Phono Stage MM/MC High-End

Made in Japan BEST BUY HIFI NEWS HIGHLY COMMENDED
22,999.00 RON (TVA inclus) Compara
Cantitate:
Stoc:DISPONIBIL
AURORASOUND - Arta pura.

Produse lucrate extraordinar si devenite arta prin insasi simplitatea lor.

O imbinare fericita intre ideile creatorului, materiale placute vederii si o
muzicalitate atragatoare, ce provoaca dependenta.

Amplificatoarele si Phono Stage-urile AURORASOUND au o recunoastere
la nivel global si se bucura de o adevarata "vanatoare" din partea doritorilor
de sunet de calitate exceptionala la un pret rezonabil.

Nu doar exceptionalul Integrat HFSA-01 dar si, in mod special, Phono Stage-urile
AURORASOUND sunt considerate adevarate referinte in categoriile lor de pret.

MADE IN JAPAN, lucrate exclusiv manual, din 1 Septembrie 2024 oentru prma
data si pentru multi ani de aici incolo in Romania.

VIDA-MKII
Ten years have passed since we released the VIDA phono equalizer amplifier.
Thanks to you, it has been recognized worldwide for its sound quality, performance,
design, and as a unique product that is the first in the world to use an LCR type
solid-state amplifier.
Based on the opinions, feedback, and market performance of customers in each
country, we have developed it into the successor model, VIDA-MkⅡ.

There are no major changes to the exterior design, because we have determined
that this design is complete and there is no room for improvement.
However, we have made various refinements to the interior and functions.

Features
Uses the same LCR type RIAA equalizer circuit as the previous model.
L = inductor, C = capacitor, R = resistor.
Four custom RIAA inductors made by Aurora Sound from Sweden's Lundahl,
which have been carefully selected to provide the basic performance of the
inductor (L) and have an even lower equivalent DC resistance and improved
Q value (low frequency + high frequency/stereo)
The rear amplifier section uses the same discrete Aurora amplifier module as
the higher-end VIDA-Supreme model.
Optimized signal path, eliminated internal wiring harness, functionally arranged
amplifier and control sections, newly developed printed circuit board resistant to
external noise.
The above improvements result in fuller midrange, tighter and clearer lows, and
more mellow highs.

L/R channel separation has been improved by 6 dB (2x) to achieve even greater
three-dimensional reproduction.

Total harmonic distortion + noise performance has been improved by approximately
2 times from 0.025% to 0.012%, and long-term stability has been improved to withstand
temperature changes and aging.

Functions
Change phono input from MC/MM selection to Phono-1.Phono-2
Changed gain and input load to MC/MM selection method
This allows for flexible support, such as 2 MC systems, 2 MM systems, and MC/MM.
The well-established MUTE SW has been changed to an Omron product to further improve operability
RCA jacks are made of solid brass and rhodium plated (same as VIDA)
Inherits all the options supported by VIDA

Power supply unit
The external power supply unit has a newly developed printed circuit board
with optimized component placement and a redesigned signal path.
There is no change in the power supply capacity or size.

Options (Extra cost)
MC load impedance 6-stage selector switch:
12, 47, 120, 240, 410, 1k Ω (value can be changed)
MM load resistor, capacitance switching SW
47k, 15k and 100pF, 330pF (values ​​can be changed)  
Built-in balanced MC step-up transformer made by Lundahl
Change the input RCA to an XLR 3-pin connector.
The signal remains unbalanced
Add an XLR balanced signal output
DC special cable, high quality version 95 cm
Mono block x 2

Specifications
Inputs:
Phono - 1
Phono - 2

MC/MM switching

MC Gain: 65dB Load Impedance: Low/High selectable, 15Ω or more/less
MM gain: 40dB Load impedance: 47kΩ fixed

Output:
RCA, rated 2Vrms, output impedance 910Ω

RIAA Difference: 10Hz ~ 20kHz +/-0.25dB
THD+N: 0.012% @1kHz MC A-Weighted
Input Equivalent Noise: -138dBV MC input short
Channel Separation: Over 90dB, @10kHz

Various functions:
MC/MM switch
MC impedance switch 
Stereo/Mono
Subsonic Filter
Degauss (cartridge degaussing function)

Power supply voltage 100V 50/60Hz

Dimensions
(W x D x H): 260 x 250 x 100 mm (Phono)
(W x D x H): 114 x 200 x 70 mm (PSU)
Weight: 2.8 kg (Phono), 1.4 kg (PSU)

Color: silver / wood
Producator: Produs:
Imagine
Phono Stage MM/MC High-End
Produs AURORASOUND
Phono Stage MM/MC High-End
VIDA-MKII
Descriere AURORASOUND - Arta pura.

Produse lucrate extraordinar si devenite arta prin insasi simplitatea lor.
Specificatii Specifications
Inputs: Phono - 1
Phono - 2
MC/MM switching

MC Gain: 65dB Load Impedance: Low/High selectable, 15Ω or more/less MM gain: 40dB Load impedance: 47kΩ fixed
Output: RCA, rated 2Vrms, output impedance 910Ω
RIAA Difference: 10Hz ~ 20kHz +/-0.25dB THD+N: 0.012% @1kHz MC A-Weighted Input Equivalent Noise: -138dBV MC input short Channel Separation: Over 90dB, @10kHz
Various functions:
MC/MM switch
MC impedance switch  Stereo/Mono
Subsonic Filter
Degauss (cartridge degaussing function)
Power supply voltage 100V 50/60Hz
Dimensions
(W x D x H): 260 x 250 x 100 mm (Phono)
(W x D x H): 114 x 200 x 70 mm (PSU)
Weight: 2.8 kg (Phono), 1.4 kg (PSU)
Color: silver / wood
Premii
DVDPLANET
Preţ: 22,999.00 RON (TVA inclus)
Disponibilitate Disponibil
REVIEWS CLIENTI
Adauga review
Ascunde review

Spune-ţi opinia

Numele tău:


Numarul de telefon:


Email-ul:


Opinia ta: Notă: Codul HTML este citit ca şi text!

Nota: Rău           Bun

Introduceţi codul din imagine: