ATLAS CABLES

The Atlas Equator MKII provides for most system types.
It is a vailable as a 2 sq mm cable or in the form of a bi-wire cable using 2.sq mm for the bass and two
conductors of 1.2 sq mm for the treble.
Unlike it's less expensive siblings, the Equator MKII uses a Polypropylene dielectric thats far more efficient
than PVC or polyethylene, and that gives greater signal velocity or speed thereby maintaining improved phase stability.
The conductors are contained in a cotton yarn in order to reduce microphony and the outer sheath is in
a tasteful pearl white finish.
The Equator MKII cables give an assured fatigue free performance with extended and sweet treble and
a satisfying bass.
Altogether these cables offer an effortless sound that provides a holographic sound stage with stereo
width, height and depth that involve the listener.
Buy the 2.0 sq mm for good balanced systems.
An AWG equivalence table is provided below.
Atlas Bi Wire cables are technically advanced.
That’s because they use conductors of different sizes that are matched for their characteristics.
The H.F. (high frequency) signal is sent down a pair of solid conductors.
That’s because the occupation area for the high frequency signal is greater in a solid conductor than it is
in a stranded conductor therefore the solid conductor is able to extend the high frequency signal upwards
into improved smear free treble.
The bass conductor is a multi stranded design in order to introduce a greater cross section of metal.
That’s because the L.F. (low frequency) signal occupies the centre of the conductor.
It follows larger conductors are able to extend the low frequency signal into improved bass.
Atlas bi-wire cables are better by design.

Features:
Low Frequency carrier: 2.0 sq mm 99.9997% pure oxygen free copper concentric multi-stranded conductors
High Frequency carrier: 1.2 sq mm solid oxygen free copper conductors
Laid in a twisted fashion to avoid the adverse effects of EMI and provide improved resistance to the proximity effect
Low loss high density foamed polypropylene dielectric
Conductors laid in a bed of cotton yarn to cut out microphony
Outer Diameter: 9.00 mm

Technical Data:
Resistance (Ohms/m @ 20°C) : 0.0095
Capacitance (pF/m) : 85.54
Inductance (µH/m @ 1 kHz) : 0.56

Color: Pearl White

The Atlas Equator MKII provides for most system types.
It is a vailable as a 2 sq mm cable or in the form of a bi-wire cable using 2.sq mm for the bass and two
conductors of 1.2 sq mm for the treble.
Unlike it's less expensive siblings, the Equator MKII uses a Polypropylene dielectric thats far more efficient
than PVC or polyethylene, and that gives greater signal velocity or speed thereby maintaining improved phase stability.
The conductors are contained in a cotton yarn in order to reduce microphony and the outer sheath is in
a tasteful pearl white finish.
The Equator MKII cables give an assured fatigue free performance with extended and sweet treble and
a satisfying bass.
Altogether these cables offer an effortless sound that provides a holographic sound stage with stereo
width, height and depth that involve the listener.
Buy the 2.0 sq mm for good balanced systems.
An AWG equivalence table is provided below.
Atlas Bi Wire cables are technically advanced.
That’s because they use conductors of different sizes that are matched for their characteristics.
The H.F. (high frequency) signal is sent down a pair of solid conductors.
That’s because the occupation area for the high frequency signal is greater in a solid conductor than it is
in a stranded conductor therefore the solid conductor is able to extend the high frequency signal upwards
into improved smear free treble.
The bass conductor is a multi stranded design in order to introduce a greater cross section of metal.
That’s because the L.F. (low frequency) signal occupies the centre of the conductor.
It follows larger conductors are able to extend the low frequency signal into improved bass.
Atlas bi-wire cables are better by design.

Features:
Low Frequency carrier: 2.0 sq mm 99.9997% pure oxygen free copper concentric multi-stranded conductors
High Frequency carrier: 1.2 sq mm solid oxygen free copper conductors
Laid in a twisted fashion to avoid the adverse effects of EMI and provide improved resistance to the proximity effect
Low loss high density foamed polypropylene dielectric
Conductors laid in a bed of cotton yarn to cut out microphony
Outer Diameter: 9.00 mm

Technical Data:
Resistance (Ohms/m @ 20°C) : 0.0095
Capacitance (pF/m) : 85.54
Inductance (µH/m @ 1 kHz) : 0.56

Color: Pearl White

		Producator: --- Selecteaza producator --- ACOUSTIC REVIVEACOUSTIC SOLIDACROLINKACUSTICA APPLICATAADL by FURUTECHAIDAS CARTRIDGESAIR TIGHTAKIKOANALOG RELAXAPOLLOARTEARTESANIA AUDIOASTELL & KERNATACAMA AUDIOATLAS CABLESAUDIENCEAUDIO ENGINEERSAUDIO HUNGARYAUDIO REPLASAUDIO SELECTIONAUDIO SUSPENSIONAUDIOMATAURORASOUNDAYREBATBELBENZ MICROBERGMANNBEYERDYNAMICBLUE HORIZONBOULDERBRIGADIERBURMESTERBYBEE TECHNOLOGIESCA ELECTRONICSCAMBRIDGE AUDIOCARDASCARY AUDIOCHARIOCLEARAUDIOCOLD RAYCUBE AUDIOCUSTOM DESIGNDAVID LABOGADAVONEDIESIS AUDIODIPTYQUEDIVINE ACOUSTICSDR. FEICKERT ANALOGUEDS AUDIODSPeakerDUALDYNAUDIODeVORE FIDELITYELECTRO HARMONIXELROGENTREQESPRITESSENTIAL AUDIO TOOLSETSURO URUSHIFABIO & SONFINALEFOSTEXFRANC AUDIOFRANCO SERBLINFURUTECHFYNE AUDIOGENALEXGENERAL ELECTRICGIGAWATTGOLD NOTEGOLDMUNDGOLDRINGGRADOGRAHAM SLEEGRANDINOTEGUTWIREHARBETHHARMONIC TECHNOLOGYHARMONIXHECOHERETICHiFiMANI-QUALIKEDAISOL - 8ISOTEKIsoAcousticsJ JJAMOJEFF ROWLANDJELCOJMRKEFKIMBER KABLEKLIPSCHKOETSUKORAKR AUDIOLEBENLEHMANN AUDIOLES DAVIS AUDIOLESS LOSSLEVIN DESIGNLITTLE FWENDLITTLE FWENDLIVING VOICEMACTONEMASTERSOUNDMERASONMETRONOMEMICROMEGAMILTYMISTRALMIT CABLESMIYAJIMA LABSMOFIMOFIMOONMOONRIVERMOOO MATMURASAKINOMUSIC HALLMUSICAL FIDELITYMY SONIC LABNAFNAGAOKANASOTECNAT AUDIONIME AUDIODESIGNNITTY GRITTYNORDOSTOEHLBACHOKKI NOKKIONKYOOPERAORB AUDIOORTOFONOYAIDEPARASOUNDPHASEMATIONPHILIPSPHONARPLINIUS AUDIOPRIMAREPRIMAREPS AUDIOPSVANEQ ACOUSTICSQEDRCAREGARELRICABLEROKSANROOM's AudioSCANDYNASCHROERS & SCHROERSSHELTERSHINOLASHUNYATASIEVEKING SoundSIMPLY ANALOGSINTHESYSSMESOLID TECHSOUL NOTESOUNDSMITHSOVTEKSSCSTAXSUGDENSUMIKOSUPRA CABLESSUTHERLANDSYMPHONIC LINESYMPOSIUM ACOUSTICSSYNTHESISTADTAKATSUKITANNOYTAOCTEKTRONTHORENSTIGLONTITAN AUDIOTON TRAGERTONARTORUS POWERTORUS POWERTRACK AUDIOTRANSFIGURATIONTRANSROTORTRENNER & FRIEDLTRIODE LABTRUE COLORSTUNG-SOLTUNGSRAMULTRASONEUNISON RESEARCHVENTOVERMOUTHVIBEXVIV LABVIVID AUDIOVPIWATTGATEWAVACWIREWORLDWOODEN BULLYAMAMOTOYTER CABLESZAVFINOZESTO AUDIOZYXfo.QhORNS Produs: --- Selecteaza produs ---
Imagine
Produs	ATLAS CABLES Bi Wire Speaker cable per meter (2 x 2.00 + 2 x 1.2 mm2) Equator MKII Bi-Wire
Descriere	The Atlas Equator MKII provides for most system types. It is a vailable as a 2 sq mm cable or in the form of a bi-wire cable using 2.
Specificatii	The Atlas Equator MKII provides for most system types. It is a vailable as a 2 sq mm cable or in the form of a bi-wire cable using 2.sq mm for the bass and two conductors of 1.2 sq mm for the treble. Unlike it's less expensive siblings, the Equator MKII uses a Polypropylene dielectric thats far more efficient than PVC or polyethylene, and that gives greater signal velocity or speed thereby maintaining improved phase stability. The conductors are contained in a cotton yarn in order to reduce microphony and the outer sheath is in a tasteful pearl white finish. The Equator MKII cables give an assured fatigue free performance with extended and sweet treble and a satisfying bass. Altogether these cables offer an effortless sound that provides a holographic sound stage with stereo width, height and depth that involve the listener. Buy the 2.0 sq mm for good balanced systems. An AWG equivalence table is provided below. Atlas Bi Wire cables are technically advanced. That’s because they use conductors of different sizes that are matched for their characteristics. The H.F. (high frequency) signal is sent down a pair of solid conductors. That’s because the occupation area for the high frequency signal is greater in a solid conductor than it is in a stranded conductor therefore the solid conductor is able to extend the high frequency signal upwards into improved smear free treble. The bass conductor is a multi stranded design in order to introduce a greater cross section of metal. That’s because the L.F. (low frequency) signal occupies the centre of the conductor. It follows larger conductors are able to extend the low frequency signal into improved bass. Atlas bi-wire cables are better by design. Features: Low Frequency carrier: 2.0 sq mm 99.9997% pure oxygen free copper concentric multi-stranded conductors High Frequency carrier: 1.2 sq mm solid oxygen free copper conductors Laid in a twisted fashion to avoid the adverse effects of EMI and provide improved resistance to the proximity effect Low loss high density foamed polypropylene dielectric Conductors laid in a bed of cotton yarn to cut out microphony Outer Diameter: 9.00 mm Technical Data: Resistance (Ohms/m @ 20°C) : 0.0095 Capacitance (pF/m) : 85.54 Inductance (µH/m @ 1 kHz) : 0.56 Color: Pearl White
Premii
Preţ:	90.00 RON (TVA inclus)
Disponibilitate	Disponibil

Adauga review
Ascunde review