CATEGORII
Pick-up Stereo High-End + ORTOFON MC Anna Cartridge - CEL MAI BUN PICK-UP DIN LUME LA CATEGORIA SA DE PRET

REGA

PLANAR 10 MC Anna

Pick-up Stereo High-End + ORTOFON MC Anna Cartridge - CEL MAI BUN PICK-UP DIN LUME LA CATEGORIA SA DE PRET

Unic distribuitor Premiera absoluta
Made in England BEST BUY STEREOPHILE RECOMMENDED COMPONENT EAR BEST BUY HIFI CHOICE MAGAZINE - EDITOR'S CHOICE HIFI CHOICE 5 STARS
58,999.00 RON (TVA inclus) Compara
Cantitate:
Stoc:DISPONIBIL
Adevarata legenda vie a pietei Hi-Fi europene si mondiale, Rega, este prezenta de acum
si in Romania, datorita parteneriatului cu STEREO PLANET.

Recunoscuta pentru calitatea impecabila a produselor sale, Rega isi selecteaza foarte
riguros partenerii.
Este unul din putinele Brand-uri care-si permit sa-si selecteze Distribuitorii dupa criterii
legate atat de competitivitatea acestora pe pietele in care activeaza cat si legate de calitatea
oamenilor si principiilor din spatele acestor Distribuitori.
Tocmai de aceea, NE ONOREAZA acest parteneriat.

Planar 10 turntable and P10 PSU
For the Planar 10, we have used the most advanced materials and engineering solutions built around
a supremely lightweight plinth to ensure the greatest level of performance.
Like its sibling the Planar 8, the Planar 10 was inspired by the ultimate Rega turntable, the Naiad.
We decided early on that instead of an evolution of the previous RP10, the new Planar 10 was to be developed
and engineered to encapsulate the essence of the Naiad at a more affordable price.
The Planar 10 narrows the gap between itself and the Naiad even further by using more exotic materials, carefully
selected to reduce mass and improve rigidity throughout the design.
New innovations in hub bearing, sub platter, motor and drive belt design have led to even greater accuracy in turntable
speed which directly improve sound performance.
The Planar 10 features the new RB3000 tonearm fitted with an improved, low mass, precision bias housing.
We have pioneered a completely new low mass, central hub bearing assembly with improved mechanical integrity.
For the first time on a Rega production turntable, a ceramic top brace delivers ultimate rigidity and accuracy whilst creating
the perfect platform between tonearm and central bearing.
Finally, this entirely new player is controlled by our most advanced electronic power supply housed in a brand-new, full metal
custom case designed to match the latest range of Rega electronics.
Apheta 3 MC factory fitted option (Recommended)
The Planar 10 will be made available with a brand new MC cartridge the Apheta 3 as a factory fitted option.
This new cartridge was developed alongside the Planar 10 and is using our most advanced "Fine Line" diamond profile.
As the recommended match for the Planar 10 turntable the Apheta 3 factory fitted package will be available at a discounted rate,
please contact your dealer for pricing.
We believe that the Planar 10 and Apheta 3 combination sets new accuracy standards in retrieving information from the record groove
making this a truly ‘state of the art’ player.


Ultra-lightweight plinth
The Planar 10 is the third Rega turntable constructed using our latest technology the ultra-lightweight Tancast 8 polyurethane foam core
(a material developed for the aerospace industry).
This material is sandwiched between two layers of HPL (high pressure laminate).
HPL is exceptionally thin and extremely rigid.
This new construction makes the new Planar 10 skeletal plinth 30% lighter than the original RP10 while offering increased rigidity over the previous model.
DB Technology (Double Brace Technology)
“Mass absorbs energy - lost energy equals lost music”!
A super lightweight plinth combined with a ceramic top brace and phenolic
resin bottom brace mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing)
forms a structurally sound, “stressed beam,” assembly.
This rigid plinth design prevents energy absorption and unwanted resonances which will add unnatural distortions to the music.
Equally, heavier mass can transfer more unwanted energy such as motor or bearing noise directly into the rotating record.
The tonearm and cartridge must to be able to read accurately, directly from the platter.
This unique Rega double brace solution enables this.
The use of braces instead of the complete skin allows increased thickness in these key areas, while providing further weight reduction
to the plinth which directly addresses the issue of mass absorption and unwanted energy transmission.
RB3000 tonearm
Rega is renowned for the quality of its tonearm bearing assemblies. In particular the accurate manufacturing of our bearing
housing and bearing spindles.
Technical characteristics such as "roundness" and "parallelity" are critical.
Over the past three years Rega has found a new manufacturing process which improves on all these characteristics resulting
in a micron perfect bearing fit.
The RB3000 is the first Rega arm to benefit from these improvements.
The entire tonearm structure is designed to have the minimum of mechanical joints while using the stiffest materials in all critical areas.
The tolerance of the RB3000 tonearm is so tight that no adhesive is used at any point throughout the construction.
Our latest low mass, precision engineered, vertical bearing assembly has been manufactured to further complement the inherent design
philosophy of the Planar 10 turntable.
The RB3000 tonearm uses our advanced, preloaded zero tolerance bearing assembly adjusted to less than 1000th of a mm.
This gives friction free movement and zero levels of unwanted play.
Simply put, friction free bearings with no play enable ridges in the record groove of less than a micron to be read.
The RB3000 also uses our latest award-winning, aluminium, Rega arm tube (each one of which is meticulously hand polished, keeping mass
to an absolute minimum) which was redesigned to redistribute mass and further reduce stresses and resonances.
This advanced design tube increases the stiffness and rigidity of the overall assembly whilst reducing stress on the bearings even further.
Hub Bearing assembly
This latest design demonstrates attention to detail and modern CNC engineering advances.
This allows new compromises, bringing Rega’s main bearing design closer than ever to the unachievable ideal.
The Planar 10 uses a new low mass central bearing assembly.
A single piece machined aluminum sub-platter and hardened tool steel spindle run inside a custom brass housing designed with improved mechanical integrity.
The complete assembly is cleverly mounted within the chassis to eradicate unwanted potential energy being transferred or stored in the plinth.
Ceramic Platter
The P10 uses a custom ceramic, flywheel effect platter.
The platter is produced from ceramic oxide powder which is compressed, fired and diamond cut to ensure perfect accuracy and flatness across the surface.
The latest platter features a modified construction with improved coupling to the sub platter.
24v Low noise motor assembly
The Planar 10 uses Rega's latest generation, 24v, synchronous, low vibration motor technology.
Uniquely mounted using the highest level of coupling while retaining higher vibration isolation than any previous model, this new motor mounting technique
(mounted from the bottom) has been taken directly from the ultimate Rega turntable, the Naiad.
This unique mounting method removes all stress from the motor body whilst holding the drive pulley perfectly still.
This enables better speed stability and accuracy from the turntable.
The reduced vibration and more rigid mounting deliver’s superior drive from the new EBLT drive belts.
Each motor is hand tuned to match its own custom matched PL10 PSU power supply before fitting to the turntable to optimise the anti-vibration circuit.
EBLT Drive Belts
For three years Rega has been researching and developing with chemists the use of a bespoke new rubber compound for drive belts.
Using a specialised curing system, the new drive belt offers superior consistency of modulus (a constant representing the degree to which a substance has
a particular property, especially elasticity).
These new belts are manufactured on Rega designed, state of the art, super-accurate tools (inspired by working with the manufacturer of high-tech Formula 1 engine parts)
which produce 'perfectly round' and 'dimensionally accurate' belts, critical for perfect speed stability.
PL10 PSU custom matched advanced power supply
The PL10 PSU offers the ultimate in motor control stability, convenient electronic speed change, advanced anti-vibration control and user
adjustable electronic fine speed adjustment to ensure total accuracy and control over the life of the motor.
Housed in Rega's latest custom designed case, the PL10 PSU is dedicated to running our 24v, low noise motor as quietly and as accurately as possible.
The speed and control of the motor is achieved by using a new DSP (Digital Signal Processing) generator built upon a high stability crystal.
This device will divide the accurate square wave from the crystal to the exact frequency required to turn the platter at the selected speed.
The DSP core will also generate a near perfect sinusoidal waveform to power the motor.
Factory set vibration removal and fine speed adjustments are then made to the power supply to tune each motor for optimal performance.
Dust Cover
The outer frame of the previous model has now been removed and a new stylish, removable, single piece dustcover has been introduced further
reducing the overall mass of the turntable.

NOTA: Capacul din acryl pentru protectia impotriva prafului ESTE inclus in cutie si in pretul produsului.
Specifications
24V Low noise motor
The motor is a high specification, 24V twin phase synchronous unit which has the anti vibration
circuit hand tuned to each motor and is controlled by Rega's unique and innovative TTPSU power supply
The motor drives the CNC machined pulley and sub platter/hub-bearing assembly via the belt drive

Dimensions (W x D x H): 420 x 315 x 125 mm
Weight: 4.7 kg
Dimensions P10 PSU (W x D x H): 218 x 320 x 80 mm
Weight: 3.00 kg
Color: High Gloss Black

NOTA: Capacul din acryl pentru protectia impotriva prafului ESTE inclus in cutie si in pretul produsului.
Producator: Produs:
Imagine
Pick-up Stereo High-End + ORTOFON MC Anna Cartridge - CEL MAI BUN PICK-UP DIN LUME LA CATEGORIA SA DE PRET
Produs REGA
Pick-up Stereo High-End + ORTOFON MC Anna Cartridge - CEL MAI BUN PICK-UP DIN LUME LA CATEGORIA SA DE PRET
PLANAR 10 MC Anna
Descriere Adevarata legenda vie a pietei Hi-Fi europene si mondiale, Rega, este prezenta de acum
si in Romania, datorita parteneriatului cu STEREO PLANET.

Recunoscuta pentru calitatea impecabila a produselor sale, Rega isi selecteaza foarte
riguros partenerii.
Specificatii Specifications
24V Low noise motor
The motor is a high specification, 24V twin phase synchronous unit which has the anti vibration
circuit hand tuned to each motor and is controlled by Rega's unique and innovative TTPSU power supply
The motor drives the CNC machined pulley and sub platter/hub-bearing assembly via the belt drive

Dimensions (W x D x H): 420 x 315 x 125 mm Weight: 4.7 kg Dimensions P10 PSU (W x D x H): 218 x 320 x 80 mm Weight: 3.00 kg Color: High Gloss Black

NOTA: Capacul din acryl pentru protectia impotriva prafului ESTE inclus in cutie si in pretul produsului.
Premii
DVDPLANET STEREO PLANET DVDPLANET DVDPLANET
Preţ: 58,999.00 RON (TVA inclus)
Disponibilitate Disponibil
REVIEWS CLIENTI
Adauga review
Ascunde review

Spune-ţi opinia

Numele tău:


Numarul de telefon:


Email-ul:


Opinia ta: Notă: Codul HTML este citit ca şi text!

Nota: Rău           Bun

Introduceţi codul din imagine: