Nu ai nici o rezervare!
| Producator: Produs: | ||
| Imagine |
![]() |
|
| Produs |
JMR CD Break-in (Pentru Boxe si Electronice) MAGIC CD |
|
| Descriere |
JMR - Jean Marie Reynaud Numele unei adevarate Institutii in Franta. Si nu numai in Franta. |
|
| Specificatii |
Specifications 1 ° / NARROW BAND OF RANDOM NOISE CENTERED ON 22 Hz: > Range 1 = 10 Hz bandwidth > Range 2 = 31.6 Hz bandwidth > Range 3 = 100 Hz bandwidth > Range 4 = 316 Hz bandwidth > Range 5 = 1000 Hz bandwidth These 5 ranges are especially intended for running in the suspensions of the woofer speakers. 2 ° / NARROW BAND OF RANDOM NOISE CENTERED ON 500 Hz: > Range 6 = 100 Hz bandwidth > Range 7 = 1000 Hz bandwidth These two ranges use the entire cone of the bass and medium speakers, they allow /ensure the break-in of this major element and stabilize the mechanical junction between the spider, the cone and the voice coil. 3 ° / NARROW BAND OF RANDOM NOISE CENTERED ON 1500 Hz: > Range 8 = 1000 Hz bandwidth This range is particularly intended for running in filter elements (high stresses from mechanical resonances of chokes and capacitors). 4 ° / NARROW BAND OF RANDOM NOISE CENTERED ON 10KHz: > Range 9 = 316 Hz bandwidth > Range 10 = 1000 Hz bandwidth These two ranges ensure optimum running-in of the suspensions and the diaphragms of the tweeters under very low noise. 5 ° / PINK NOISE: > Range 11 = It is a white noise filtered at -3 dB per octave, it coversthe entire audible spectrum (20 Hz - 20 Khz) with constant energy. It is particularly recommended for the break-in of modulation cables and it can be used, in this case, the volume of the amplifier at zero. (transmission of the modulation between the CD and the amplifier for example). PROCEDURE FOR USING THE DISC: Imperative!… Before playing this disc, set the volume of your amplifier to zero. Play track 1: Very gradually increase the volume while looking at the cones of your bass speakers, their movement will quickly become large and messy despite a low noise level. As soon as the slightest bottoming out appears (moving coil hitting the bottom of the air gap), immediately reduce the volume. Taking into account the random nature of the signal level, this adjustment will be optimized over a period of time of approximately one minute. Once the level has been adjusted, do not touch the amplifier settings when playing successive tracks on the disc. Failure to comply with this imperative precaution could lead to technical incidents for which we would not be responsible in any way. Each new use of this disc, even partial, will involve the same adjustment procedure. NOTE: To run in the loudspeakers, you can connect the two loudspeakers in phase opposition and position them face to face quite close to each other (approximately 30 cm), the noise generated will be reduced (acoustic short-circuit) the break-in is carried out just as efficiently. |
|
| Premii | ||
| Preţ: | 169.00 RON (TVA inclus) | |
| Disponibilitate | Disponibil | |