SYNTHESIS - Italienii de langa Ancona stiu cum se creeaza bijuteriile.
Bijuterii pentru fiecare buzunar, executate cu stil, rafinament si sex appeal.
Nu este nicio exagerare in compararea amplificatoarelor SYNTHESIS cu bijuteriile
de lux, purtate de persoane cu gust si standarde pe masura.
Este suficient sa vedeti si sa ascultati primul produs din gama SYNTHESIS, un entry-level,
si sansele de a va indragosti de sunetul produs de Soprano este garantat.
Vine intrebarea imediata.
Daca un produs de 8.499 lei (Soprano) suna asa, oare cum vor suna celelalte, superioare lui?
Intrebarea isi va gasi singura raspuns, imediat ce veti avea ocazia sa achizitionati oricare din
produsele SYNTHESIS.
For over three decades we have been dedicated to the research of audio excellence.
Mr. Luigi Lorenzon and his team is dedicated to creating audio components that honour
musical performances.
Through careful design, careful selection of the best components available and meticulous
attention to construction, we have created what we believe to be an unrivalled line preamplifier
in its class.
The new ROMA117DC tube line preamplifier with its great tonal balance and refined reproduction
is the perfect combination with the ROMA98DC mono power amps.
The ROMA117DC matches the simple and elegant design of the rest of the ROMA Series.
A product of great musicality for the most demanding music lovers.
The audio circuit consists of a two-stage amplification incorporating two Pairs of 6922 / ECC88 Tubes.
The balanced and balanced inputs are managed through the use of an input tube.
The output stage of the amplifier is made using an output transformer.
A low output impedance makes the ROMA117DC extremely flexible in the choice of interconnect cables
for connection to the final stages of power amplifiers.
The frequency response is extremely linear and extended enough to reach 5 Hz - 40KHz at -3dB.
The power supplies of both the filaments and the anodic are electronically regulated with a regulation
better than 0.1%.
Features a remote control that allows for volume adjustment and source selector.
Electronic switches are located near the input connectors, keeping signal paths very short to minimize
crosstalk between channels.
In the audio circuit, only precision resistors a metal film and polypropylene capacitors are used.
The tubes have been selected to ensure quality and minimize noise and microphonics.
Specifications
Tubes:
4 x 6DJ8/ECC88
Inputs:
4 x RCA
1 x XLR
Input Sensitivity:
5V RMS Max
Input Impedance:
100 kΩ balanced (XLR)
47 kΩ unbalanced (RCA)
Outputs:
(TRANSFORMER COUPLING)
1 x XLR
2 x RCA
1 x REC OUT RCA
Output Impedance:
1 KΩ balanced (XLR)
470Ω unbalanced (RCA)
Output Level:
36 V RMS balanced (XLR)
18 V RMS unbalanced (RCA)
Gain:
+ 22.5 dB balanced (XLR)
+ 16.5 dB unbalanced (RCA)
Frequnecy Response:
5 - 40 KHz (- 3 dB)
Distortion:
< 0,1% (20 Hz – 20 kHz @ 1V RMS)
S/N Ration:
> 90 dB “A” weighted
Crosstalk:
> 80dB
Line Power:
100, 117, 230, 245 Vac +-10%, 50/60 Hz (see rear label)
Consumption:
60W Max (< 0,5 W St-by)
Fuse:
See rear label
HEADPHONE OUTPUT
Input Impedance:
> 16ohm, high fidelity driver
Power Output:
>300mW (32ohm)
Frequency Response:
5 - 40 KHz (- 3 dB)
Distorsion:
< 0,1% (20 Hz – 20 kHz)
S/N Ration:
> 95dB, A weight
Gain:
+ 22,5 dB
REMOTE CONTROL
Body:
Anodized black aluminium
Transmission Type:
Infrared
Protocol:
RC5
Functions:
Volume, mute, input, selection, st-by
Batteries:
2 x CR2032
Weight: 200 g
Dimensions (W x D x H): 410 x 390 x 95 mm
Weight: 10 kg
Colors: Black High Gloss, Anodized Aluminium Black, Silver, Walnut, Wood